PIA4800 Series

PIA4800 Series

Power Supply Controller Supporting Multiple Channels : 5 Models

The PIA4810 is a power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled.
Moreover, DC power supplies with a digital remote-control function, such as the Kikusui PAS, PAM(*1) and PMR Series, can be directly connected to the PIA4830 via a TP-BUS (twisted pair bus), enabling a system up to 32 channels to be controlled digitally.

PIA4820 is an expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed.
Then it is possible to use up to 3 units of PIA4820 as an expansion that can be connected to the PIA4810 via the TP-BUS, the system is capable of controlling a maximum of 32 channels. Moreover, the combined use of the GPIB and TP-BUS allows the system to control a maximum of 448 channels.
PIA4830 is a power supply controller only for digital control. It is capable of digitally controlling a system up to 32 channels of such Kikusui PAS, PAM(*1) and PMR Series DC power supplies via the TP-BUS.
OP01-PIA and OP02-PIA are control boards designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP01-PIA is a full-control board with voltage and current setting and read-back functions, while the OP02-PIA4800 has only the voltage and current setting feature.
(*1) The TP-BUS interface option is factory installed option, this option should be indicated when ordering.

Model Specification Manual
PIA4810 The power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled Manual
PIA4820 The expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed. Manual
PIA4830 The power supply controller only for digital control. It is equipped with the GPIB and RS-232C interfaces. And it is capable of digitally controlling of Kikusui PWR, PAS, PAM and PMR Series DC power supplies via the TP-BUS. Manual
OP01-PIA The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads.
The OP01-PIA is a full-control board with voltage and current setting and read-back functions.
OP02-PIA The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads.
The OP02-PIA has only the voltage and current setting feature.

Have a Any Question?

Datasheet

Email Us