All-in-One Support for RF Measurements and Protocol Tests in FR1 (to 7.125 GHz) and FR2 (Millimeter-Wave) Bands

With a 5G base station emulation function, a single MT8000A test platform supports both the FR1 (to 7.125 GHz), including band n41, and the FR2 (millimeter-wave) bands used by 5G. Combining it with the OTA Chamber enables both millimeter-wave band RF measurements and beamforming tests using call connections specified by 3GPP. With the SmartStudio NR MX800070A, various functional tests by GUI operation only without requiring difficult scenario development are supported, also combining it with the Shield Box MA8161A supports functional tests in FR2 bands.

All-in-One 5G NR Support for Protocol Conformance Tests and Carrier Acceptance Test

The ME7834NR is the test platform for 3GPP based Protocol Conformance Tests (PCT) and Carrier Acceptance Testing (CAT) of mobile devices incorporating Multiple Radio Access Technologies (RAT). The ME7834NR supports 5G New Radio (NR) Technology in both Standalone and Non-Standalone mode, in addition to LTE, LTE-Advanced (LTE-A), LTE-A Pro, and W-CDMA.

Supports 3GPP defined bands from Sub-6GHz to mm-Wave

The 5G NR Mobile Device Test Platform ME7834NR covers the 5G frequency bands defined by 3GPP including sub-6 GHz and millimeter Wave when combined with Anritsu’s new OTA chamber MA8171A and RF converters.

Trust conformance test system

Anritsu’s long experience in Conformance Test development started with the first 3G services and continues to the present as the company provides timely solutions meeting customers' expectations, including future 5G deployments. Anritsu is continuing to deliver experience-based trusted test solutions incorporating state-of-the-art technology to customers.

Early 3GPP Compliant Test Case Release

We shall continue with early release of 3GPPcompliant RF Conformance Test cases also for 5G deployments.

Support Global Mobile Terminals

The ME7873NR is fully 3GPP-compliant and supports both FR1 (Sub-6GHz) and FR2 (mmWave) frequency bands. It can test almost all 5G NR mobiles used worldwide.

The System with Stable Measurement

Auto correction before measurement eliminates drift due to temperature changes, greatly improving measurement stability.

Key Specifications

Frequency: 600 MHz to 6 GHz, 24 GHz to 43.5 GHz

Dimensions: 434 (W) × 271 (H) × 328 (D) mm

The RF Chamber MA8171A is for integrated RF measurements and protocol tests, such as 5G NR beam management tests, in an OTA environment. It is used for development of 5G NR chipsets, devices, and terminals. With support for both 5G NR Standalone (SA) and Non-standalone (NSA) modes, it enables mmWave band measurements and tests when combined with an RF converter.

The CATR Anechoic Chamber MA8172A uses the 3GPP-compliant Compact Antenna Test Range (CATR) method to implement 5G NR OTA tests in a small space. It can be used for mmWave development and conformance tests of 5G NR chipsets, devices, and UE. Transport is easy because it can be disassembled into three component parts, and assembly and installation require less than 5 days, greatly shortening the introductory setup time.

The MT8821C Radio Communication Analyzer is designed for R&D of mobile devices / user equipment (UE), such as smartphones, tablets and IoT modules. It builds on the technologies of its popular predecessor, the MT8820C, preferred by UE and chipset vendors worldwide.

The new MT8821C supports all technologies, ranging from LTE-Advanced to 3G/2G, with its easy-to-use measurement functions for efficient RF adjustment and testing in one unit.

It even supports LTE-A 2CC 4x4 MIMO and 4CC 2x2 MIMO in a single box as well as LTE-U/LAA.

Also, it supports LTE-A 4CC 4x4MIMO or 6CC 2x2MIMO by interlocking two boxes, and 5CC 4x4 MIMO by three boxes.

The Vector Signal Generator MG3710E is a best-of-class, multi-function, signal generator with excellent RF and baseband performance. The MG3710E features wideband vector modulation and offers built-in baseband waveform generation with large-capacity memory to ensure maximum versatility. It supports all key mobile communications and wireless LAN standards, and it also has the exceptional performance required for emerging and proprietary wireless communications technologies. Dual RF and Dual Waveform options enable a single MG3710E to output up to four independently modulated signals. The MG3710E makes it easy to implement complex test scenarios that would normally require multiple synchronized signal generators, such as:

  - Wanted + Interference Signals for Receiver Blocking Testing

  - Wanted + Two CW Tones for Receiver Intermodulation Testing

  - Wanted + Delayed Signals for Multipath Testing

  - Multiple Wanted Signals for MIMO Testing

  - Multiple Wanted Signals for LTE-Advanced Carrier Aggregation Testing

The Wireless Connectivity Test Set MT8862A (WLAN Tester) is for measuring the RF TRx characteristics of WLAN IEEE802.11a/b/g/n/ac/ax (2.4 GHz and 5 GHz bands) devices. The MT8862A has standard WLAN protocol messages (WLAN Signalling) to connect with the device under test (DUT) for measuring each TRx performance item as Network Mode, and features built-in Direct Mode to support flexible test environment.

  - RF Performance Measurement under Realistic Operation Conditions (Network Mode)

  - Easy Measurement Environment Configuration

  - 2x2 MIMO Rx sensitivity and Tx power measurement functions

  - Device Measurement with encrypted signal

  - Unique Data Rate Control Algorithm for Tx Measurements

  - Rx Sensitivity Measurements using ACK Frame Count for Bathtub Curve Generation

  - Web Browser GUI Operation Immediately after Connection

  - Frame Capture Logging for Troubleshooting Connection Problems

  - IP Data Transfer using Connection Verification Test

The Bluetooth Test Set MT8852B is the market leading RF measuring instrument for design proving and production test of a wide range of products that integrate Bluetooth® technology. It supports Basic Rate (BR), Enhanced Data Rate (EDR) and Bluetooth low energy (BLE) measurement of transmit power, frequency, modulation, and receiver sensitivity required by Bluetooth RF test specification.

In production, a single key press initiates a measurement script that tests a device in less than 10 seconds.

Adding this option supports the 2 Mbps Low Energy PHY (2LE) tests expected to improve dramatically improve battery life and Bluetooth Long Range (BLR) tests supporting communications beyond a range of 500 m that are both included in Bluetooth Core v5 specifications or later.

The Adaptive Frequency Hopping (AFH) option facilitates analysis of interference from, and co-existence with, interfering signals such as WLAN. This option provides graphical displays of FER and masked channels when interfering signals are introduced, allowing optimization of hardware designs.

The Microwave Spectrum/Signal Analyzers MS2830A-044 and MS2830A-045 offer frequency coverage to 26.5 GHz and 43 GHz for unmatched value in their class. They are compatible with Anritsu’s External Mixer MA27xxC series, enabling millimeter-wave spectrum analysis to 325 GHz. Moreover, with excellent dynamic range, they also support the High Performance Waveguide Mixer options MA2806A and MA2808A for spectrum analysis of millimeter-wave wideband signals.

Like the rest of the MS2830A product family, these instruments offer excellent performance, versatility, and measurement speed. Features include:

The Signal Analyzer MS2850A is a spectrum analyzer/signal analyzer with a maximum analysis bandwidth of 1 GHz and a frequency range of 9 kHz to either 32 GHz or 44.5 GHz. It has an analysis bandwidth supporting wideband communications measurements, such as 5G mobile communications and broadcast satellite equipment, providing all-in-one coverage from the sub-6 GHz to millimeter-wave 28 GHz/39 GHz bands. With excellent cost- performance, this benchtop signal analyzer helps cut development and production costs for communications equipment while improving efficiency.

The signal analyzer function can capture up to 24 seconds (at 100 MHz span) using the large 32-GB memory. Digitized signal data can be analyzed with general EDA tools for efficient R&D into next-generation standards prior to release of new standards. In addition, adding the PCIe/ISB3.0 option for high-speed transfer of large captured data helps with efficient R&D by cutting data transfer times.

The MG3690C series of broadband signal generators covers audio, HF, VHF, UHF, RF and microwave frequencies from 0.1 Hz to 70 GHz in single coaxial output and up to 500 GHz or beyond, with external multipliers. In addition, it is easy to operate either through intuitive front panel controls or remotely via GPIB or Ethernet connectivity. Thus, the MG3690C series is an ideal signal source for both RF and microwave requirements, fully configurable for simple to high performance applications.

The MG3690C offers three levels of SSB phase noise performance; Standard, Ultra low phase noise (option 3) and Premium phase noise (option 3X). The MG3690C also has an optional full suite of modulation capabilities including AM, FM, Phase and Pulse to address simple to complex signal simulation requirements.

Signal purity determines quality of measurements in several applications such as radar, transceiver, ADC/DAC and components testing. Rubidium™ pushes the envelope in phase noise performance with its low and ultra low phase noise options. Coupled with best-in-class harmonic and spurious performance, Rubidium signal generator offers industry leading overall signal purity performance, that enable customers to make more accurate measurements.

Rubidium MG362x1A offers atomic clock frequency stability with an internal rubidium frequency reference option. Alternatively, customers can also get exceptional frequency stability by locking an internal oven controlled crystal oscillator (OCXO) reference to an external GNSS/GPS signal. The exceptional frequency stability makes Rubidium an ideal signal generator for Metrology and high speed clock applications.

Rubidium’s AM, FM/PM and Pulse modulation capabilities enable generation of wide range of complex analog modulated signals. Simultaneous modulation of AM/FM, AM/PM, or FM/Pulse is possible to generate complex modulation waveforms such as chirps. Wide range of signal simulation capabilities are built into the signal generators for pulsed radar testing, as well.

The benchtop Optical Spectrum Analyzer MS9740B features wide dynamic range, high resolution, and fast sweep speeds over a wavelength range of 600 nm to 1750 nm. It supports multimode fiber input and is ideal for manufacturing and evaluating 850-nm band VCSEL modules.

As well as keeping the same functions and performance as its predecessor, the MS9740B slashes measurement processing times by up to half*1 while overcoming problems of decreased measurement sensitivity caused by increased processing speed.

Moreover, it retains optical active device (LD-Module, DF-LD, FP-LD, LED, PMD, WDM, Opt Amp, and WDM Filter) measurement menu screens for evaluating devices. It supports all-at-once measurements of key evaluation items, such as optical center wavelength, level, OSNR, spectrum width, etc., and displays these results at one screen.

The Field Master MS2070A is the latest version of Anritsu’s handheld spectrum analyzers. Built on a field-proven durable platform, the Field Master MS2070A provides a comprehensive set of features with excellent performance up to 3 GHz. MS2070A is designed to conduct RF measurements in a variety of general-purpose field and lab environments. With dynamic range of >105 dB at 2.4 GHz, the MS2070A can capture and measure HF, VHF and UHF signals common in commercial and military applications. Typical DANL with a built-in optional preamplifier of -167dBm, coupled with a Third Order Intercept (TOI) of +11 dBm and typical level accuracy of ±0.5 dB enable a full range of signals to be captured by the handheld spectrum analyzer. The MS2070A is designed so engineers can conduct standard swept spectrum analysis measurements simply and accurately up to 3 GHz. It features sweep speeds of up to 32 GHz/s in common low noise configurations.

The MS2080A builds on Anritsu’s pioneering history of developing reliable and dependable instruments for the world’s most demanding RF measurements in the toughest environments. Weighing less than 9 pounds (4 kg), the MS2080A is small, compact, and easy to carry. When hunting for interfering RF signals in the field, MS2080A offers a wide range of features to identify and locate the source. A fast sweep speed of 45 GHz/s coupled with AM/FM demod and RF source geolocation help pinpoint the position of interfering signals fast. The optional real-time spectrum analyzer captures even the shortest of bursted or TDD signals and the addition of the S331P Site Master enables cable and antenna line sweep measurements on the same instrument. LTE and 5G base station measurement options support operators and contractors perform the essential measurements when installing or optimizing the network. For use on the bench, the hard case with rubberized easy grip bumpers and integrated kick stand makes the MS2080A an ideal instrument for general purpose lab measurements where portability and space are at a premium.

Frequency Range: 9 kHz to 9/14/20/26.5/32/43.5/54 GHz

Anritsu’s Field Master Pro MS2090A real time spectrum analyzer delivers performance never previously available in a compact, handheld instrument. With continuous frequency coverage from 9 kHz to 54 GHz, the Field Master Pro MS2090A is specifically designed to meet the test challenges of a full range of other wireless technologies in use today, including: 5G, LTE, wireless backhaul, aerospace/defense, satellite systems, and radar. The Field Master Pro MS2090A delivers the highest levels of RF performance available in a handheld, touchscreen spectrum analyzer, with a displayed average noise level (DANL) of -164 dBm and Third Order Intercept (TOI) of +20 dBm (typical). This makes measurements such as spectrum clearing, radio alignment, harmonic, and distortion even more accurate than previously possible. For modulation measurements on digital systems, 110 MHz modulation bandwidth coupled with best-in-class phase noise performance maximizes measurement precision, while ±0.5 dB typical amplitude accuracy provides confidence when testing transmitter power and spurious. Ruggedized for field use, all versions provide a comprehensive range of features to speed and simplify measurement, as well as enhance usability. RTSA spans of 22 MHz to 110 MHz (option dependent) provide capability for cellular interference monitoring to full ISM band signal analysis. In addition to being a full span swept tuned spectrum analyzer, all versions include a spectrogram display that helps monitor the RF spectrum for intermittent or interfering signals. Integrated channel power and occupied bandwidth measurements simplify the measuring and characterizing of common radio transmission. Cable and Antenna line sweep measurements are supported with the addition of the S331P Site Master. IQ data capture of 5G frames enables the capture and saving of IQ data for off-line processing on a PC using standard data analysis tools.

Ultra-portable. Ultra-broadband. The Spectrum Master™ MS276xA family of ultraportable spectrum analyzers is the first solution of its kind to provide continuous coverage to 170 GHz. This family now offers: The Spectrum Master MS2760A models: providing full broadband coverage from 9 kHz to 170 GHz with excellent dynamic range and DANL performance. The Spectrum Master MS2762A models: providing increased dynamic range and DANL performance than the Spectrum Master MS2760A models for the most demanding sensitivity requirements, these units frequency coverage range is from 6 GHz to 170 GHz. The Spectrum Master MS2760A and MS2762A solutions deliver the best-in-class price/performance ratio unmatched by traditional benchtop instruments. The Spectrum Master™ MS276xA series are pocket-sized, yet big on performance with leading dynamic range, sweep speed, and amplitude accuracy. The ultraportable size of these instruments enables a direct connection to almost any DUT, eliminating the need for lossy, expensive cables. This enables you to more efficiently advance your technology development and reduce your time to market.

The ACCESS Master MT9085 series is a compact handheld all-in-one tester for performing optical pulse tests, optical loss/power measurements, and optical fiber end-face inspections. It has a wide variety of applications, ranging from installation and maintenance (I&M) of trunk fibers (Core, Metro, Mobile Fronthaul, Mobile Backhaul) to troubleshooting Access networks, such as breaks in drop cables. As well as keeping the intuitive operability of previous models using hard keys and rotary knob, the MT9085 has been upgraded with a wide, 8-inch, color, LCD touchscreen. The Fiber Visualizer function has also been taken to the next stage with at-a-glance confirmation of the optical fiber transmission path.

The Coherent OTDR MW90010B can measure ultra-long submarine cables of up to 20,000 km to locate faults with 10 m measurement resolution. Coherent detection technology captures waveform data, including fault location, cable loss, bending loss, fiber length, etc., for detailed evaluation of submarine cables. Its excellent basic performance, such as measurement time and dynamic range, accurately measures submarine cables with optical-amplifier repeaters separated by distances of 80 km or more. Moreover, setting the built-in tunable light source with a wavelength accuracy of ±0.05 nm to a wavelength range of 1527.60 nm to 1567.13 nm supports measurement of DWDM submarine cables.

All-in-One 5G NR Support for Protocol Conformance Tests and Carrier Acceptance Test

The ME7834NR is the test platform for 3GPP based Protocol Conformance Tests (PCT) and Carrier Acceptance Testing (CAT) of mobile devices incorporating Multiple Radio Access Technologies (RAT). The ME7834NR supports 5G New Radio (NR) Technology in both Standalone and Non-Standalone mode, in addition to LTE, LTE-Advanced (LTE-A), LTE-A Pro, and W-CDMA.

Supports 3GPP defined bands from Sub-6GHz to mm-Wave

The 5G NR Mobile Device Test Platform ME7834NR covers the 5G frequency bands defined by 3GPP including sub-6 GHz and millimeter Wave when combined with Anritsu’s new OTA chamber MA8171A and RF converters.

All-in-One 5G NR Support for Protocol Conformance Tests and Carrier Acceptance Test

The ME7834NR is the test platform for 3GPP based Protocol Conformance Tests (PCT) and Carrier Acceptance Testing (CAT) of mobile devices incorporating Multiple Radio Access Technologies (RAT). The ME7834NR supports 5G New Radio (NR) Technology in both Standalone and Non-Standalone mode, in addition to LTE, LTE-Advanced (LTE-A), LTE-A Pro, and W-CDMA.

Supports 3GPP defined bands from Sub-6GHz to mm-Wave

The 5G NR Mobile Device Test Platform ME7834NR covers the 5G frequency bands defined by 3GPP including sub-6 GHz and millimeter Wave when combined with Anritsu’s new OTA chamber MA8171A and RF converters.