ISN-T8

Impedance Stabilization Network for 8 lines

150 kHz to 30 MHz

ISN T8 is for Unshielded Telecom Lines. Its design is based on the circuit illustrated in Figure D.3 of CISPR 22 and Figure F8 of CISPR 32.

The RF Port is a 50 Ohm female BNC connector, located on the top of the ISN. The ISN is equipped with two D-sub 25 pin female connectors located on the front panel (EUT Port) and rear panel (AE Port), providing the interface to the LCL Adapter and Connecting Adapter, respectively.

Features

  • -  Frequency range of 150 kHz to 30 MHz
  • -  For Unshielded Telecomunication Lines 1 to 4 balanced pairs
  • -  Complies with CISPR 16-1-2, CISPR 22/32
  • -  Individual Calibration Included

Specifications

  •   Standards: CISPR 16-1-2, CISPR 22, CISPR 32
  •   Frequency Range: 150 kHz to 30 MHz
  •   Application: Unscreened lines w/up to 4 balanced pairs
  •   Max. Current rating: 800 mA (per line), 1.6 Amps (per pair)
  •   Voltage rating: 100 VDC / 64 VAC (line to ground @ 50/60 Hz)
  •   RF Port Connector: 50O BNC (female)
  •   EUT/AE Port Connections: RJ45 (RJ11 also available)
  •   Common mode Impedance: 150O

    • Charts

    Have a Any Question?

    Datasheet
    Manual
    Email Us